Find below information on how to wear, clean and generally care for your Halos® – To help keep you protected all day, every day. If you have any further questions, please visit our FAQs page.
How to Wear Rezon Halos®
The narrow section of Halos® should sit at the front of the head, on the forehead, and above the eyebrows. The Rezon logo should be positioned on the left temple area.
It is personal preference to have Halos® above the ears or covering the top of the ears – Halos® has been designed to accommodate both wearing styles. Halos® should be equally aligned on the head, and not twisted to the right or left side.
The broader section of Halos® should be positioned at the back of the head. Hair can be worn above Halos®, using the drop at the back to accommodate a pony tail.
For more commonly asked questions and answers relating to Halos®, please see our FAQs.
Attaching the chin strap to Halos®
Materials Needed: Rezon Halos®, Halos® chin strap, mirror for positioning (optional).
Steps to attach the Chin Strap:
- Lay chin strap out flat with the elastic side facing up and the Velcro unattached.
- Lift the Velcro ends of the chin strap up and over both sides of Halos®, and press them together securely.
- Place the Halos® and chin strap on your head, ensuring that the chin strap is centred under the chin and evenly positioned.
- Adjust the Velcro positioning evenly on both sides to allow for a snug, comfortable fit. The chin strap should exert gentle pressure but not cause discomfort, and should hold the headgear in place without being too tight or uncomfortable.
- Check the Positioning: Use a mirror or assistance from a carer or healthcare professional to check that the headgear and chin strap are positioned correctly, making any necessary adjustments for comfort and effectiveness.
Regularly check the chin strap for wear and tear, and replace it if necessary. If you have any specific concerns or issues, please get in touch for assistance.
Halos® Maintenance and Cleaning
Inspect Halos® before and after each use, to ensure that the fabrics, seams and inner Rotection® technology are undamaged. Do not use Halos® if damaged. Replace if there are holes, tears, or broken seams. If in doubt, return to us for professional inspection. Halos® should be replaced after 24 months from first use, and sooner if it becomes damaged.
Check that all seams are intact before washing. Do not wash if any seams are broken or there are tears in the fabric. The supplied netted wash bag should be used to wash and to transport Halos®. Spin dry at no more than 600 rpm.
Allow to dry naturally after machine-washing or air after use. Store at room temperature. Keep away from heat sources.